# Development and Collaboration

**URL:** https://openuc2.discourse.group/c/have-a-new-idea-for-a-module-a-setup-or-want-to-look-for-collaboration/8.md

[Latest](https://openuc2.discourse.group/latest.md) · [Categories](https://openuc2.discourse.group/categories.md) · [Tags](https://openuc2.discourse.group/tags.md)

---

## [About the Development and Collaboration category](https://openuc2.discourse.group/t/about-the-development-and-collaboration-category/13)

<div class="topic-metadata">

**Author:** [@openuc2](https://openuc2.discourse.group/u/openuc2)\
**Replies:** 0

</div>

Have an idea? We can realize it - together!

---

## [Rotator for tomographic imaging](https://openuc2.discourse.group/t/rotator-for-tomographic-imaging/113)

<div class="topic-metadata">

**Author:** [@benedictdied](https://openuc2.discourse.group/u/benedictdied)\
**Replies:** 1\
**Last updated:** [March 24, 2026, 9:32am UTC](https://openuc2.discourse.group/t/rotator-for-tomographic-imaging/113 "2026-03-24T09:32:24Z")

</div>

Together with some folks from Göttingen, we want to revamp the off-axis holographic imaging device. This is the first important step to have the rotation done. It’S the sample aquarium from the light-sheet microscope, bu…

---

## [Using limit switches to automate/calibrate motors in uc2-rest](https://openuc2.discourse.group/t/using-limit-switches-to-automate-calibrate-motors-in-uc2-rest/94)

<div class="topic-metadata">

**Author:** [@tomvh](https://openuc2.discourse.group/u/tomvh)\
**Replies:** 18\
**Last updated:** [March 5, 2025, 1:22pm UTC](https://openuc2.discourse.group/t/using-limit-switches-to-automate-calibrate-motors-in-uc2-rest/94 "2025-03-05T13:22:23Z")

</div>

Would anyone have any experience on using a cnc shield v3 with esp32 board and using a limit switch? Seems like motors are nice but with limit/end switches calibration could be a lot easier. There seem dedicated ports on…

---

## [\[Collab\] UC2 Light-sheet microscope](https://openuc2.discourse.group/t/collab-uc2-light-sheet-microscope/27)

<div class="topic-metadata">

**Author:** [@benedictdied](https://openuc2.discourse.group/u/benedictdied)\
**Replies:** 2\
**Last updated:** [May 28, 2024, 12:38pm UTC](https://openuc2.discourse.group/t/collab-uc2-light-sheet-microscope/27 "2024-05-28T12:38:50Z")

</div>

This is the thread I would like to use to push the current developments of the UC2 light-sheet microscope.

---

## [\[Idea\] UC2 Galvo Laserscanning System](https://openuc2.discourse.group/t/idea-uc2-galvo-laserscanning-system/20)

<div class="topic-metadata">

**Author:** [@benedictdied](https://openuc2.discourse.group/u/benedictdied)\
**Replies:** 1\
**Last updated:** [April 24, 2024, 9:38pm UTC](https://openuc2.discourse.group/t/idea-uc2-galvo-laserscanning-system/20 "2024-04-24T21:38:06Z")

</div>

This is the first attempt to integrate a laser scanner into the UC2 system

---

## [Idea: Off-Axis Holographic reconstruction plug-in](https://openuc2.discourse.group/t/idea-off-axis-holographic-reconstruction-plug-in/25)

<div class="topic-metadata">

**Author:** [@AaronRiSa](https://openuc2.discourse.group/u/AaronRiSa)\
**Replies:** 1\
**Last updated:** [March 25, 2024, 6:31am UTC](https://openuc2.discourse.group/t/idea-off-axis-holographic-reconstruction-plug-in/25 "2024-03-25T06:31:41Z")

</div>

@benedictdied I am trying to develop an Off-axis holographic setup and use an ImSwitch plug-in for the Phase reconstruction. So far we can compute the FFT of the current intensity image seen on the camera. Then, we can …